Vatech PaX-I, 2D Digital Panoramic X-ray


  • Superior Image Quality
    Optimal image for accurate diagnosis
  • Two Dedicated Sensors (if equipped with Ceph)
    Specialized sensors for Pano & Ceph
    Streamlined workflow and prolonged lifespan of sensors
  • User-friendly Software, EzDent-i
    Complete diagnostic and consultation solution
  • Industry Exclusive Trade In/Up Options




PaX-i provides the most precise and high quality panoramic image by combining imaging processing and accumulated experience in dental imaging from VATECH. This will improve your diagnostic accuracy with increased treatment planning and patient satisfaction.


A clear and sharp panoramic image brings you better diagnostics.
Advanced details, especially in the anterior and roots can be easily viewed with the PaX-i.
These consistently high quality images are the new standard of panoramic imaging.


The PaX-i has various capture modes to meet your diagnostic needs.
You can choose any capture mode based on your diagnostic needs.

Selection:                    PANORAMIC EXAMINATION

Arch:                           Narrow / Normal / Wide / Child

Examination Mode:    Standard / Right / Front / Left


Selection:                    PANORAMIC EXAMINATION

Arch:                           Orthogonal

Examination Mode:    Orthogonal Standard / Right / Front / Left

Bitewing Standard / Right / Front / Left


Selection:                    SPECIAL EXAMINATION

Arch:                           Normal

Examination Mode:    TMJ LAT Open / Close
TMJ PA Open / Close
Sinus LAT / PA

Pan Scan Times:          13.5 Sec in HD mode / 10.1 Sec in Normal mode

Brochures and Education

Vatech Product Catalog

BuyBack PaX I 5 Year 2018


  • Weight Without Ceph:  90kg (198.4 lbs) with Base: 140 kg (308.6 lbs)
  • Weight With Ceph (Scan Type): 120 kg (264.5 lbs) with Base: 170 kg (374.8 lbs)
  • Weight With Ceph (One Shot type): 130 kg (286.6 lbs) with Base: 180 kg (396.8 lbs)
  • Total Height:                                                   2300mm (90.55 inches)
  • Vertical Column Movement:                          700mm (27.56 inches)
  • Length x Width x Height, w/o Ceph:             1060mm (L) x 1200mm (W) x 2300 (H) / 41.73” (L) x 47.24” (W) x 90.55” (H)
  • Length x Width x Height w/ Scan type Ceph:  1920mm (L) x 1200mm (W) x 2300 (H) / 75.6” (L) x 47.2” (W) x 90.55” (H)
  • Length x Width x Height w/ One Shot Ceph:  1930mm (L) x 1200mm (W) x 2300mm (H) / 75.98” (L) x 47.24” (W) x 90.55” (H)
  • Electrical:USA / Cananda:                                              120 V AC / 50/60 Hz, Single phasePower Rating:                                                 Max 1.8 kVA


5-Year Warranty on All Parts

Trade In / Trade Up Buyback Program


Vatech, Quality And BuyBack Info

Buyback Program

What is the Vatech Buyback Policy?

Within three years of the installation date, Vatech and your supporting dealer will buyback your 2D imaging system applying 100% of the original purchase price you paid towards an eligible brand new 3D imaging system. Rather than upgrading the hardware of an aging imaging system, Vatech will provide a BRAND NEW 3D imaging system if you choose to exercise this policy. 0% Depreciation!

Maintain your upgradability by resetting your technology with a BRAND NEW device with the Vatech Buyback Program.


Trade In/Up Program

What is the Vatech Trade In/Up Program?

As technology rapidly evolves, protecting your investment from accelerated depreciation can be found exclusively in the Vatech Trade In/Up Program.

Vatech will provide a trade in value for your 3D imaging system, utilizing a lower-than-market depreciation rate, allowing you to maximize the return for your imaging system when it’s time to upgrade to a new 3D device.

Minimize your long term costs, maximize the residual value of your imaging system, and upgrade to a newer and more advanced technology with ease by participating in the Vatech Trade In/Up Program.

PC Requirements

PC System Requirements (Recommended)


— The PC system plays a large role in processing and viewing quality images. Image quality may be diminished if the PC specifications are not met. Please adhere to the requirements specified in the following table.

— If necessary, upgrade your PC’s system configuration to meet the following specifications.

— DO NOT place the PC or peripheral equipment connected to the PC in the immediate vicinity of the patient.

Item                             HP                                                       LENOVO

CPU:                           Intel® Core® i3-2130 3.4GHz           Intel® Core® i3-2120 3.3GHz

RAM:                          4GB x1 DDR3-1333 ECC RAM        4GB (2GB*2) DDR3 1333MHz


HD (Hard Drive):        500GB SATA 7200 1st HDD             500GB SATA 7200 1st HDD

Graphic board:            Intel H61 Express Chipset                  ATI HD7350 512M (DVI+DP) FH

Ethernet:                     Realtek RTL8171E                             Intel®82579 Gigabit Ethernet

Gigabit Ethernet interface

Serial Port (RS232):    1 (On board)                                       1 (On board)

Power supply:             ≥ 300 Watts (85 % Efficiency)           ≥ 320 Watts (85 % Efficiency)

Slots:                           1 PCI Express x 1 Slot                        1 PCI Express x 16 Slot

1 PCI Express Gen1 x 1 Slot              1 PCI Express Gen2 x 16 Slot

2 PCI Slots                                          2 PCI Slots

CD/DVD drive:          SuperMulti DVD Drive                     SATA DVD-ROM/DVD Recordable

Monitor:                      19” 1280 x 1024 screen resolution     19” 1280 x 1024 screen resolution

Operating system:       Windows 7 Home                               Windows 7 Professional 64- Bit OS

Premium 64-Bit OS

Recommended            :           Pro 3330                                              M82



Installed by WDA Qualified Technicians. This item is shipped via FREIGHT to a Moving & Storage or similar facility and then delivered via Movers or WDA Technicians to your office. Additional Moving & Storage Fees may apply.
*This product may require additional IT support and software integration, WDA Equipment Solutions will work with your IT provider prior to installation so that PC and Site Requirements are met.
Installation may require electrical/network cabling work performed by 3rd party contractors for an additional fee.
Installation may require wall support backing to be installed by a 3rd party contractor for an additional fee. WDA Equipment Solutions Equipment Specialists will inspect the site prior to installation to make sure installation requirements are met.
Digital Panoramic X-ray systems require a PC for functionality.
Installation includes the following:
• Site assessment
• Assessment of wall backing and support, electrical and network jack requirements
• Delivery (Professional Movers or by WDA technicians)
• Installation by WDA Service Solutions Technicians
• Additional IT and software support is required, NOT INCLUDED
• Staff training (required)